39
OPERATION
Driving S afely
Driving Procedures
1. Sit in the driver’s seat and fasten the seat belt.
2. After starting the engine and allowing it to warm up, shift the
transmission into gear.
3. Check you r su rroundings and determine your path of travel.
4. Release the parking brake.
5. Keeping both hands on the steering wheel, slowly depress the
throttle with your right foot and begin driving . Vehicle sp eed is
controlled by the amount of throttle op ening and Polaris Variable
Transmission (PVT) shifting is automatic.
6. Drive slowly. Practi ce maneuvering and using the throttle and
brakes on level surfaces.
NOTE: Low is the primary gear f or operating the RANGER 4X4 and
6X6. High gear is intended for use on hard-packed surfaces
with light loads.
To Next Page
Loading...
