Stabilization Setting
To enable the Stabilization feature:
1. In the Video/Photo Record Mode, press the OK Button to switch to the
record setup menu screen.
2. Use the Right/Left Buttons to select the Video Capture Menu. The
submenu of the Video Capture Menu. will pop up on the screen.
3. Use the Up/Down Buttons to select the Stabilization setting then press
the OK Button to switch to Stabilization submenu.
4. Use the Up/Down Buttons to choose between ON or OFF. (You will
see on the upper right corner of the LCD display.)
5. Press the OK Button to confirm the setting and exit.
Record Menu Setup Screen Stabilization Option
OK Button
NOTE:
• The captured screen will be smaller when stabilization is enabled.
• Digital Zoom is disabled when stabilization is activated.
To Next Page
Loading...
