Date Printing (Photo Record Mode Only)
To enable the Date Printing Feature:
1. When in the Still Capture Menu, use the Up/Down Buttons to select
the Date Printing feature, then press the OK Button to switch to the
Date Printing submenu.
2. Use the Up/Down Buttons to choose between On or Off.
3. Press the OK Button to confirm the setting and exit. (You will see the
date on the lower left corner of the LCD display.)
Record Menu Setup Screen Date Printing option
OK Button
NOTE:
Date would be shown on the Photo once date printing is enabled.
Night Mode
Use Night Mode for night scenes or low light conditions.
Record Menu Setup Screen Night Mode option
OK Button
NOTE:
To avoid blurry pictures, place the camera on a flat, steady surface, or use a tripod.
To Next Page
Loading...
