13 Troubleshooting
• Troubleshooting
1.If the LCD image is not clear when shooting, how can the focus be
adjusted?
Make sure the subject is within the focus range; Normal mode is at least
30 cm (11.8 inches) away from the lens.
In the Macro mode, the subject needs to be between 1 to 30 cm (0.39 to
11.8 inches) away.
Make sure the camera is not in the Marco mode if your subject is within
the normal focus range. If it is on, you will see the Macro [ ] on the
lower right side of the LCD display. If your subject is at least 30cm (11.8
inches) away and the camera is set to Macro, the subject will look out of
focus on the LCD display.
2.The flash is not working.
The camera is in Macro Mode.
The battery power is low.
3.When recording, the digital zoom does not function.
If the “Stabilization” function is activated when recording videos, the
“Tele/Wide” button for digital zooming will be disabled.
4.The files on the memory card do not display smoothly when the LCD
shows the “!” or “funnel” marking.
The “!” means the file format is not supported and the “funnel” marking
indicates the file is not read smoothly. Delete these files and the others
can then be played normally. It is recommended that you first format the
memory card before using it and avoid placing files with different formats
in the same folder.
To Next Page
Loading...
