• Still Capture Settings
Photo Resolution
To change the picture resolution:
1. In Video/Photo Record Mode, press the OK Button to switch to the
record setup menu screen.
2. Use Right/Left Buttons to select the Still Capture Menu. The submenu
of the Still Capture Menu will pop up on the screen.
3. Use the Up/Down Buttons to select the Resolution Setting then press
the OK Button to switch to the Resolution submenu.
4. Use the Up/Down Buttons to move between the three settings. (You
will see on the upper left corner of the LCD display.)
5. Press the OK Button to confirm the setting and exit.
Display Screen Image Resolution Option
OK Button
To Next Page
Loading...
