Selftimer (Photo Record Mode Only)
The selftimer allows you to take pictures with a ten-second time delay.
The Self-timer LED on the front of the camera will also blink. The speed of
blinking will increase just before the Photo is taken.
To enable the Selftimer:
1. When in the Still Capture menu, use the Up/Down Buttons to select
the Selftimer, then press the OK Button to switch to the Selftimer
submenu.
2. Use the Up/Down Buttons to choose between On or Off.
3. Press the OK Button to confirm the setting and exit.
Record Menu Setup Screen Selftimer option
OK Button
To Next Page
Loading...
