Flash (Photo Record Mode Only)
This camera has three flash settings. You can change the flash setting by
either the hot key (Right Button) or using the Option Setting.
• Auto Flash ( ) The flash fires automatically according to
lighting conditions. Use this setting for most
photographic scenes.
• Red Eye Reduction( ) The pre-flash will fire to reduce the red-eye
effect.
• Flash off ( ) The flash will not fire under any circumstances.
Use this mode when taking images in a place
where flash photography is prohibited, or when
the subject is far away (beyond 10 feet).
To change the Flash setting:
1. When in the Still Capture menu, use Up/Down Buttons to select
the Flash Option, then press the OK Button to switch to the Flash
submenu.
2. Use the Up/Down Buttons to move between the three settings.
3. Press the OK Button to confirm the setting and exit.
NOTE:
The flash will be disabled automatically when battery power is low.( )
Record Menu Setup Screen Flash option
OK Button
To Next Page
Loading...
