Backlight (Photo Record Mode Only)
With the camera set to the backlight Mode, you can take shots when
bright light is behind the subject.
To enable the Backlight Feature:
1. When in the Still Capture Menu, use the Up/Down Buttons to select
the Backlight feature, then press the OK Button to switch to the
Backlight submenu.
2. Use the Up/Down Buttons to choose between On or Off.
3. Press the OK Button to confirm the setting and exit. (You will see
on the upper left corner of the LCD display.)
Record Menu Setup Screen Backlight option
OK Button
To Next Page
Loading...
