3. Flip the door back into place as shown in the illustration and slide the
locking tab in the direction of the arrow.
• Inserting a SD/SDHC Memory Card
Expand your camera’s memory by using SD or SDHC memory cards. Your
camera supports SD cards of up to 4GB and SDHC cards of up to 32GB in
size.
Follow these instructions to insert the SD/SDHC card.
1. Make sure the power is off before inserting
a SD/SDHC memory card.
2. Swing on the SD card door in the direction of
the arrow and flip the door open.
3. Insert the SD/SDHC card into the
memory card slot label side up.
M B
4. Push the SD/SDHC card into the memory
slot until it clicks into place.
5. Close the SD card door as shown in the
illustration.
To remove the SD/SDHC card, gently push
the card inward with your finger and release
it. Pull out the card carefully.
To Next Page
Loading...
Need help?
General
