To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
2. For single image, use the or keys to scroll
and select an image to mark for printing.
3. Specify the number of copies. Use the
or DISP to increase/decrease number.
4. Press the FUNC button to toggle between
turning on/ off the date stamp.
5. Press the SET button to save DPOF settings.
DPOF
Date stamp off
0000
Copies
To reset DPOF
1. Select Reset on the DPOF submenu. A
confirmation message appears.
2. Select Yes.
3. Press the SET button to reset DPOF
settings.
Yes
Cancel
Reset DPOF?
NOTE:
You can specify up to 99 copies for DPOF. If you specify 0 copies, the DPOF setting
of that image is automatically disabled.
• PictBridge
The PictBridge function allows you to print images
captured by your camera without connecting the
camera to a PC. Print images with a PictBridge
compatible printer directly.
To activate PictBridge:
Connect your camera to a PictBridge compatible
printer using the USB cable. See illustration
below.
NOTE:
If the printer does not support date stamp, the date stamp function will be disabled
in PictBridge.
To Next Page
Loading...
Need help?
General
