To activate Intelligent Scene
1. Select from the Scene Mode submenu.
2. Focus the camera on the subject to capture.
3. The camera detects the shooting conditions
and switches to the appropriate scene mode.
4. Press the shutter button halfway down to
allow the camera to focus on the subject. The
frame turns green to indicate focus is set.
5. Press the shutter button to take the shot.
307307
10M
The camera displays a solid white
frame when a face is detected.
NOTE:
When Intelligent Scene function is enabled, icons will be displayed even in the
Guideline, or No Display modes are enabled when the shutter button is pressed
halfway down.
The table below shows the modes supported by Intelligent scene:
Icon. Intelligent
Scene Modes
Description
Portrait This mode is set when a face is detected.
Landscape This mode is set when:
• There is no face detected.
• The focus distance is more than 1.5 meters.
• The EV setting is greater than 11 or 10.5.
Sunset This mode is automatically set when sunset lighting is detected.
Macro This mode is set when:
• There is no face detected
• The focus distance is within the macro range.
This mode can only be detected when you half press the shutter button.
Blacklight This mode is set when a face is detected with an EV setting greater
than 2.5.
B a c k l i g h t
Portrait
This mode is set when a face is detected with an EV setting greater
than 2.5.
To Next Page
Loading...
Need help?
General
