• Turning the Power On and Off
There are two ways to turn on the camera:
• Press and hold the Power button. The start up image displays briefly
and the startup sound plays if enabled. The zoom lens extends and the
camera is turned on in the Record mode.
• Press and hold the Playback button. The camera is turned on in Playback
mode. The zoom lens is not extended.
To turn off the camera, press the Power button.
See “Modes” on page 20 to learn more about Record and Playback mode.
• Initial Settings
When you turn on your camera for the very first time, you will be asked to
establish the initial settings of your camera; Language and Date/Time.
When you turn the Power button on, the Language Menu is shown on the
LCD display for you to setup your display language.
Setting the Language
1. Press ,
, or to move through the selections.
2. Press OK to select your language.
Setting the Date & Time
1. Press or
to change the value of the date and time.
2. Press OK to apply.
3. If necessary, press MENU to close the menu.
Now, you are ready to start taking photos and videos.
NOTE:
• Holding down or
scrolls through the choices continuously.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
