45
Polaroid i1437 Digital Camera User Guide
www.polaroid.com
• Setting the Drive Mode
Your camera features a Self-timer and Burst
which can be set in the Drive mode function in
the Record Menu. The Self-timer allows you to
take photos after a pre-defined delay. While burst
lets you take consecutive shots. This function is
only available for recording still images. The Drive
mode setting is automatically set to off when you
turn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
2. Use the or
keys to go through the
selection.
3. Press the OK button to save and apply
changes.
The table below shows the available Drive mode settings.
Sets a 10-second delay to capture image after pressing the Shutter
button.
Sets a 2-second delay to capture image after pressing the Shutter
button.
Performs delay and capture twice:
1. Performs a 10-second delay, then captures the image.
2. Performs another 2-second delay then captures the image
again.
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the shutter button is released.
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
Captures an image without time delay.
is held down. The Camera stops shooting when the shutter
button is released.
Sets a 10-second delay to cature an image after pressing
the shutter button.
Performs delay and captures two images:
• performs a 10-second delay, then captures the image.
• performs another 2-second delay and then captures the image
again.
Sets a 2-second delay to cature an image after pressing the
shutter button.
Performs continuous picture taking when the shutter button
To Next Page
Loading...
Need help?
General
Weight and Dimensions
