To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
2. For single image, use the or keys to scroll
and select an image to mark for printing.
3. Specify the number of copies. Use the or
to increase/decrease number.
4. Press the FUNC button to toggle between
turning on/ off the date stamp.
5. Press the OK button to save DPOF settings.
To reset DPOF
1. Select Reset on the DPOF submenu. A
confirmation message appears.
2. Select Yes.
3. Press the OK button to reset DPOF settings.
NOTE:
You can specify up to 99 copies for DPOF. If you specify 0 copies, the DPOF setting
of that image is automatically disabled.
• Radial Blur
The Radial Blur is an effect creates blurs around a point, simulating the result
of a zooming or rotating the camera.
To set Radial blur for an image:
1. Use the or
keys to specify the level of blurs. You can preview your
adjusted image on the LCD display.
2. Press the OK button to proceed to the save
options.
3. Available settings are as follow::
• Overwrite. Save and replace the old file
with the new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel Radial blur.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
