5 Recording Photos, Videos and Voices
• Taking Photos
Now that you are familiar with your camera, you are now ready to take your
photos.
Taking photos with your camera is very simple.
1. Turn on the camera by pressing the Power button. By doing this, your
camera is set to Record mode.
2. Frame your shot using the focus frame
on the LCD display. See illustration on the
right.
3. Press the shutter button halfway down.
The camera automatically adjusts the
focus and exposure. When the camera
is ready to take the photo, the focus
frame turns green, the shutter speed and
aperture value are displayed. (When the
focus frame is in red and the operation
LED blinks, the subject is not in focus.
Release the shutter button, recompose
the scene and press the shutter button
halfway to reset the focus.)
4. Press the Shutter button all the way down to capture your image. When
the shake warning icon appears, hold the camera steady, with your arms
at your side or use a tripod to stabilize the camera to prevent a blurry
image. You may need to turn on the camera’s flash or enable the Image
Stabilizer feature to get a better picture.
• Using the Image Stabilizer
The Image Stabilizer function prevents blurred images caused by shaking.
This function is only available if ISO is set to Auto.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
