Polaroid i1437 User Manual

70
Polaroid i1437 Digital Camera User Guide
www.polaroid.com
• Setting Startup Image
The Startup Image function allows you to setup a startup image when you
turn on your camera.

1. Press the MENU button to launch the
Playback menu.
2. Select Startup Image. The menu selection
appears.
3. Select options:
• System. Use camera default image.
• My Photo. Use the or keys to scroll and select desired image.
• Off. Disable the startup image.
4. Press the OK button to apply changes.
NOTE:
The startup image will still be displayed even if the selected image was deleted.
• Setting DPOF
The Digital Print Order Format (DPOF) function allows you to mark still images
in your memory card for printing and allows you to specify the number of
copies that you want to print at a later date. When all images to be printed
are marked, take the memory card to a digital printing service, or use a DPOF
compatible printer.
To set DPOF
1. Press the MENU button to launch the
Playback menu.
2. Select Startup Image. The submenu appears.
Availablesettings are as follows:
• Single. Select a single image to mark.
• All. Mark all images in the memory card.

• Reset. Reset all DPOF settings to initial default settings.

Polaroid i1437 Specifications

General

Megapixel	14 MP
Camera type	Compact camera
Sensor type	-
Image stabilizer	Yes
Maximum image resolution	- pixels
Digital zoom	5 x
Optical zoom	3 x
Interface	USB, AV out
Digital SLR	No
ISO sensitivity	80, 100, 200, 400, 800, 1600, 3200, Auto
Internal memory	64 MB
Compatible memory cards	sd, sdhc
Motion JPEG frame rate	30 fps
Maximum video resolution	1280 x 720 pixels
Display diagonal	2.7 \
Product color	Red
Battery technology	Alkaline
Number of batteries supported	2
Flash modes	auto, fill-in, Flash off
White balance	Auto

Weight and Dimensions

Width	- mm