29
This television receiver represents a fine example of electronic engineering and construction. As
such it should be treated with care. We offer the following suggestions so you will enjoy this product
for many years to come.
Keep it dry. If water should get on it, wipe it off
immediately. Water contains minerals that can
corrode electronic circuits.
Do not store in hot areas. High temperatures can
shorten the life of electronic devices, damage
batteries, and can even distort or melt certain plastics.
Do not drop your product. This will likely result in
failure to operate.
Do not use or store in areas with a high level of dirt or
dust. The electronic parts may be contaminated or
wear prematurely.
Do not use harsh chemicals or strong cleaning
solvents to clean your unit. wipe it with a slightly moist
cloth.
Make make sure any batteries used are fresh and
are of the correct type. Old or almost-dead batteries
are dangerous.
A worn out battery can leak chemicals which will
damage the electronic circuits.
Care & Maintenance
TV Section
Television system NTSC American TV Standard
ATSC(8VSB terrestrial) ATSC compliant 8VSB
QAM on cable ATSC compliant 64 QAM/256 QAM
Channel coverage Terrestrial(analog) 2-69
Cable TV(analog) 1-125
Terrestrial(digital) 2-69
Cable TV (digital) 1-135
Antenna 75-ohm external antenna terminal for VHF/UHF
Audio
Audio Output 2.0 W + 2.0 W
HDMI
Support format HDMI 1.1, HDMI 1.2, HDMI 1.3
Support definition 480i, 480p, 720p, 1080i, 1080p
General
AC Power Supply AC 120V ~60Hz
Power Consumption 38 W
Remote Control Batteries AAA x 2
Dimensions(mm) D190 x W540 x H385(mm)
Net Weight 5.7kg
v
Design and specifications are subject to change without notice.
Technical Specification