20
To charge your radio, carefully follow these instructions:
Connect the power adaptor to the main power supply and connect
the adaptor power plug to the charging cradle.
Disconnect any radio accessories and ensure the radio is switched
off.
Insert the radio into the charging cradle until it ‘clicks’ home. The
charger LED will glow red and charging will start. If the charger LED
blinks red and green or the charger LED does not light, re-insert
the radio into the charging cradle.
The battery charging time is typically 12 to 15 hours. When the
battery is fully charged the charger LED will turn green.
1.
2.
3.
4.
Power adaptor:
- Input: 230VAC
- Output: 9VDC
Adaptor power plug
Charge Cradle
LED
4. BATTERY CHARGING
To Next Page
Loading...
