28
Priority Channel
The Priority Channel is the channel that should be used for the Triple
Watch as well as the Priority Channel Scan. If one Priority Channel
is not selected in the Function Mode, the Priority Channel Scan and
Triple Watch will not work.
To change the Priority Channel setting, press the MENU button until
the Priority Channel icon and current setting ashes. Use the UP or
DOWN button to change the setting. Press the PTT or MENU button
or wait for 5 seconds to store your choice.
The Priority Channel icon will appear when one Priority Channel has
been selected.
Key Beep
If the Key Beep is activated, your radio will emit a conrmation tone
whenever you use the keypad. You can activate or deactivate the Key
Beep as required.
To change the Key Beep setting, press the MENU button until the Key
Beep icon appears. Use the UP or DOWN button to change the set-
ting. Press the PTT or MENU button or wait for 5 seconds to store your
choice. The Key Beep icon will appear when Key Beep is active.
Display & Keypad Backlight
The display and keypad backlight will illuminate for 5 seconds whe-
never any buttons (except for the PTT button) are pressed.
Battery level
The Battery icon indicates when the battery level is low and the bat-
tery needs recharging.
Power Save
To conserve battery power the radio will automatically enter Power
Save mode after a short period of inactivity. There is no user setting
for Power Save.
To Next Page
Loading...
