POLMAR Navy-010 - 10. TROUBLESHOOTING; 11. SAFETY REQUIREMENTS

29
10. TROUBLESHOOTING
If you experience problems with your Navy-010 marine band radio
rst check the battery power level as low batteries can cause pro-
blems such as poor transmission, weak reception and reduced sound
quality.
Then check the manual and radio display to ensure that a function
(such as Lock) has not been activated by accident.
If these steps do not solve the problem reset your unit as follows:
Switch off the radio.
Press and hold the Menu button, Down button and PTT button
together.
Switch on the radio and press the Menu button.
Turn off the radio and turn it on again.
This will reset the radio to the factory settings and should resolve most
problems. In case of further difculty please consult your dealer.
11. SAFETY REQUIREMENTS
For charging the rechargeable batteries, only a CE approved AC
adaptor complying with the following specications must be used:
INPUT : AC 230V 50Hz
OUTPUT : DC 9V 300mA
1.
2.
3.
4.