To Next PageTo Next Page
Need help?Do you have a question about the Poly EagleEye Cube and is the answer not in the manual?
General| Frame Rate | Up to 60 fps |
|---|---|
| Zoom | 5x digital zoom |
| Auto Framing | Yes |
| Camera Type | PTZ Camera |
| Video Resolution | 1080p |
| Field of View | 120 degrees |
| Connectivity | USB |
| Microphone | Integrated |
| Audio Pickup Range | Up to 6 meters |
| Video Standards and Protocols | H.264, H.265 |
| Low Light Performance | Yes |
| Mounting | Tabletop or wall mount |
| Compatibility | Zoom, Microsoft Teams |
Guide for users of all levels to learn about EagleEye Cube features and intended use.
Links to Polycom support sites, document library, community, and partner network for additional information.
Details camera resolution, zoom, supported applications, and framing modes like speaker and group framing.
Explains how to power the device using USB 3.0 or PoE, noting it cannot power up with USB 2.0.
Initial setup and configuration using the setup wizard via Polycom Companion, including password and network settings.
Access and view basic device information through the Polycom Companion application.
Steps to update the device's firmware using the Polycom Companion application.
Adjust device name and NTP settings via Polycom Companion.
Set tracking mode, speed, and framing size for automatic camera control.
Configure Ethernet IP, DNS, and 802.1x security settings.
Steps to set up a provisioning server for the device.
Export and import device configuration settings using Polycom Companion.
Enable Windows 7 compatibility mode for improved video conferencing.
Configure and control camera settings and features using Polycom Companion.
Manually adjust pan, tilt, and zoom when tracking mode is off.
Save and load custom camera positions and zoom settings.
Adjust brightness, contrast, hue, saturation, sharpness, and white balance.
Interpret LED colors and timing for device status and errors.
Test camera audio and save a recording file for troubleshooting support.
Monitor available audio channels and their signal strength.
Show camera parameters directly on the video output.
Procedure for downloading log files to assist with troubleshooting.
How to restart the device using Polycom Companion.
Reset device configurations and settings to factory defaults.
Restore device software to the factory image, removing updates.
