Poly EagleEye Cube - Understand LED Indicators

Camera Setting Description
Contrast Adjusts image contrast.
Hue Adjusts the image color.
Saturation Adjusts the video color saturation.
Sharpness Adjusts the video sharpness.
White Balance Specifies how the camera compensates for variations
in room light sources.
Select Auto or adjust the value manually. If you adjust
manually, select a color temperature value. The color
temperature values, measured in degrees Kelvin,
correspond to the color of the ambient light in a room.
Backlight Comp Enables or disables backlight compensation.
PowerLine Frequency (Anti Flicker) Changes the power line frequency value to prevent
flicker in the video.
5. Select Apply to save the changes or Default to restore the default settings.
6. (Only for Windows) Select Camera Control to control the camera using the following options:
Settings Description
Zoom Adjusts camera zoom in/out.
Pan Adjusts the up or down direction of the camera.
Tilt Adjusts the left or right direction of the camera.
Zoom, pan, and tilt features are available only when the EagleEye Cube Tracking Mode is off.
7. Select Save.
LED Indicators
The following table describes the LED indicators and associated system behaviors on EagleEye Cube.
The LED indicators are located along the top of the camera above the aperture.
LED Indicator List
Mode LED Color LED Timing # of LEDs
Attention (Error preventing normal
operation)
Red Blinking 5 - All
Camera boot initialization process
in progress
White Chasing 5 - Alternating
Device firmware update in progress Amber Pulsing 5 - All
Using the EagleEye Cube USB Camera
15