Poly P017 Administrator's Guide

Indicator Status
Solid blue Paired successfully
Blinking green and blue Update in progress
Factory restore in progress
Powering the Microphone Adapter On and Off
When plugged in to a power source, the microphone adapter is on. The system doesn’t have a power button, so you must
unplug the power cable to power it off.
Don’t power off the system during maintenance activities (for example, while a software update is in progress).
Connecting Microphones to the Microphone Adapter
To connect a non-IP Polycom microphone to the microphone adapter, use a RealPresence Group Series microphone array
Walta-Walta cable. You can then daisy chain up to three additional microphones to the one directly connected to the
adapter. A maximum of four microphones are supported.
For more information, see the Polycom Microphone IP Adapter Setup Sheet.
Move a Microphone Adapter to Another Location
You might need to move your microphone adapter from a G7500 and Studio X series system in one room to a G7500 and
Studio X series system in another room.
Task
1 In the system web interface, unpair the microphone adapter from the system.
2 Move the microphone adapter to the new location.
3 Use the system web interface to pair the microphone adapter to the new system.
27

Poly P017 Specifications

General

Brand	Poly
Model	P017
Category	Conference System
Language	English