Poly P017 Administrator's Guide

CSR Information Description
User Principle Name (UPN) Specifies the user and domain name to log in to a Windows domain (for example,
UserName@YourDomain.com). This is the userPrincipalName attribute of the account
object in Active Directory.
Relate this setting to the 802.1X identity and password you specified on the Network
> LAN Options page. Default is blank.
4 Select Create.
5 If the CSR was created successfully, select CSR Available for Download to download the CSR file to send to a CA,
which issues your signed certificate.
Create a TC8 Certificate Signing Request
If you deploy a PKI in your environment, create a CSR to make sure your system or device is trusted by its network peers.
Only one CSR can exist on your device at a time. After you generate a CSR, get it signed and install it on your device before
generating another. If you generate a second CSR before you install the first one, the device discards the previous CSR.
Task
1 In the system web interface, go to Security > Certificates.
2 Select Poly TC8 > Create and Download CSR.
3 In the Certificate Details form, complete the following fields:
CSR Information
Description
Hash Algorithm Specifies the hash algorithm for the CSR: SHA-256 (recommended) or SHA-1 (not
recommended).
Common Name (CN) Specifies the system name. This is a required field. Maximum characters: 64 (truncated
if necessary).
Poly recommends the following guidelines for this field:
• For systems registered in DNS, use the system’s FQDN.
• For systems not registered in DNS, use the system’s IP address.
Organizational Unit (OU) Specifies the unit of business defined by your organization. Default is blank. Maximum
characters: 64.
Note: The system supports only one OU field. If you want the signed certificate to
include more than one OU field, you must download and edit the CSR manually.
Organization (O) Specifies your organization’s name. Default is blank. Maximum characters: 64.
City or Locality (L) Specifies the city where your organization is located. Default is blank. Maximum
characters: 128.
State or Province (ST) Specifies the state or province where your organization is located. Default is blank.
Maximum characters: 128.
Country (C) Displays the country selected in the setup wizard. You can’t change this setting here.
SAN: FQDN Specifies the FQDN assigned to the system. This is the same as the Common Name
(CN), but it isn’t truncated. Default is blank. Maximum characters: 253.
SAN: Additional Name Specifies an additional name. Default is blank. Maximum characters: 253.
SAN: IPv4 Address Default is the IPv4 address of the system. Maximum characters: 15.
57

Poly P017 Specifications

General

Brand	Poly
Model	P017
Category	Conference System
Language	English