Change the voice prompt language on your headset in Poly Lens Desktop App.
There are 2 audio modes: wideband (conversation) and narrowband.
To optimize your audio quality for your activity, with the system idle, press the headset
Mute button for 4 seconds. The headset cycles through the modes with each 4 second
press. Also configurable in Poly Lens Desktop App.
You can limit the amount of nearby conversation that is transmitted during your calls.
Customize feature in Poly Lens Desktop App.
Changing the range can help with PC audio quality, improve user density or restrict range
of users.
You can adjust the range setting in Poly Lens Desktop App.
Setting
Range
High (Default) up to 300 ft.
Medium up to 150 ft.
Low up to 50 ft.
You can set up a conference call with 3 additional Savi headsets.
1 While on a call, press the USB adapter subscription button. D200 adapter: press the USB
adapter's recessed subscription button with a pen or paper clip.
The adapter subscription LED flashes red and green or red and blue.
2 On guest headset, press and hold the Volume up button or turn the Volume wheel up until
the headset LED lights up. Method varies by model.
3 The primary user will hear "Conference requested." To accept the request, press the
primary user's headset Call button. Both users hear "Conference accepted." View
conference call status by going to Poly Lens Desktop App. Guest headsets can remain as
guests through multiple calls.
4 To remove a guest headset, either press the guest headset's Call button or dock the
primary user's headset in the charge cradle.
Typically, your DECT USB adapter is subscribed (connected) to your headset. In the event that
your adapter is disconnected or bought separately, you will need to subscribe the adapter to your
headset. The adapter subscription method depends on which USB adapter you use.
Subscribe D400 USB adapter again
1 Insert the DECT USB adapter into your laptop or computer and wait for the LED to light
up.
2 To put your headset in subscribe mode, press and hold the Volume up button for 4
seconds. Your headset LED lights up.
3 To put your DECT USB adapter into subscribe mode, double press the subscription button
until the USB adapter flashes red and green.
More Features
Change voice prompt
language
Optimize audio quality
Limit office noise
Set the range
Set up a conference
call
Subscribe USB
adapter again
16
To Next Page
Loading...
