Poly Savi 8240 User Manual

After you install the headset battery, choose one of the three headset
wearing styles, over-the-ear, over-the-head or behind-the-head. Use the fit kit
to assemble it and optimize the position of the microphone.
Install the Headset Battery
Position the battery as shown on the headset and slide into position until the battery snaps into
place.
NOTE This product has a replaceable battery. Use only the battery type supplied by Plantronics.
Use the Fit Kit to Assemble Your Headset
Choose a headset wearing style and use the fit kit to assemble it over-the-ear, over-the-head or
behind-the-head.
Right Over-the-Ear Assembly
1 Choose the size of earloop that fits most comfortably. Align the earloop as shown and insert it
onto the headset. Rotate the earloop up 90°.
90º
NOTE Ensure the earloop is flat against the headset before rotating.
2 Choose the size and style of eartip that fits most comfortably. Align the eartip with the notch
facing the microphone as shown. Press on to attach.
NOTE Ensure the large end of the eartip points to the microphone.
Fit and charge
Customize Your Headset
6

Poly Savi 8240 Specifications

General

Wireless Technology	DECT 6.0
Noise Cancellation	Yes
Charge Time	3 hours
DECT Security Certification	Yes
Voice Prompts	Yes
Charging Time	3 hours
Warranty	2 years
Range	Up to 590 feet
Connectivity	DECT, USB
Microphone	Noise-canceling
Wearing Style	Convertible (over-the-ear, over-the-head, behind-the-head)
Battery Type	Rechargeable Lithium-ion
Microphone Frequency Response	100 Hz - 8 kHz
Speaker Frequency Response	20 Hz to 20 kHz
Conference Calls	Up to 4 headsets
Compatibility	Desk phone
Earpiece Type	Monaural
Weight	21 grams (earpiece)