Poly Savi 8240 User Manual

3 To correctly position your headset, see Position Your Headset.
Left Over-the-Ear Assembly
1 Choose the size of earloop that fits most comfortably. Align the earloop as shown and insert it
onto the headset. Rotate the earloop up 90°.
90º
NOTE Ensure the earloop is flat against the headset before rotating.
2 Choose the size and style of eartip that fits most comfortably. Align the eartip with the notch
facing the microphone as shown. Press on to attach.
NOTE Ensure the large end of the eartip points to the microphone.
3 To correctly position your headset, see Position Your Headset.
Position Your Headset
When you wear the headset, the microphone should rest as close to your cheek as possible
without touching. The microphone can be adjusted inward by the pivoting earpiece to optimize the
position of the headset.
1 Slide the headset over and behind your ear and fit the eartip into your ear.
2
Holding the base of the headset, push it in and back towards your ear to allow the pivoting
earpiece to bring the microphone close to your mouth. As the base of the headset moves
backwards, you will feel soft clicks until the microphone rests close to your cheek.
7

Poly Savi 8240 Specifications

General

Wireless Technology	DECT 6.0
Noise Cancellation	Yes
Charge Time	3 hours
DECT Security Certification	Yes
Voice Prompts	Yes
Charging Time	3 hours
Warranty	2 years
Range	Up to 590 feet
Connectivity	DECT, USB
Microphone	Noise-canceling
Wearing Style	Convertible (over-the-ear, over-the-head, behind-the-head)
Battery Type	Rechargeable Lithium-ion
Microphone Frequency Response	100 Hz - 8 kHz
Speaker Frequency Response	20 Hz to 20 kHz
Conference Calls	Up to 4 headsets
Compatibility	Desk phone
Earpiece Type	Monaural
Weight	21 grams (earpiece)