Using Appspace, Raydiant, or another digital signage provider, you can display alert messages, quick tips, videos, or
company messaging on the front of room monitor when the system is idle. You must have an account with a digital signage
provider to configure digital signage on Poly video systems. In Poly Partner Mode, some providers don't support digital
signage.
Note: RingCentral and StarLeaf don't support digital signage.
• Appspace
• Raydiant
Configure Digital Signage
Configure digital signage to display when the video system is idle during office hours.
You must have an account with a digital signage provider to use this feature. The digital signage platform provides the tools
necessary to configure the digital signage you want to display on the system. Use the digital signage provider's tools to
choose and configure the digital signage the system displays.
Configure out-of-office hours so the system shows digital signage only during office hours. See Configure Out of Office
Settings.
Task
1 In the system web interface, go to General Settings > System Settings.
2 Under Digital Signage, select the check box for Enable Digital Signage.
3 Configure the following settings:
Setting Description
Start After Select how long the system can be idle before digital signage
begins.
Provider Choose Custom or one of the listed digital signage servers.
Signage URL If you select Custom, enter the URL of the digital signage
provider.
Account Location For Appspace, and Raydiant accounts only. Select whether the
account is Private or Public.
If you set the Appspace location to Private, you'll need to enter
the URL of your private Appspace server.
4 Select Save.
5 Select Test to test the signage URL.
106
To Next Page
Loading...
Need help?
General
