Poly Studio E70 Administrator's Guide

• On the bottom of the Studio X70, insert a straightened paper clip through the factory restore pinhole.
• On the side of the Studio X50, insert a straightened paper clip through the factory restore pinhole.
• On the bottom of the Studio X30, insert a straightened paper clip through the factory restore pinhole.
3 While continuing to hold the restore button, reconnect the power supply to turn the system on.
4 When the system LED indicator light turns amber, stop pressing the restore button.
You can only view the restore progress on a display connected to the secondary monitor HDMI output port.
Note: You can’t view the restore progress for a Studio X30 system because it doesn't support a secondary monitor
connection.
Factory Restore the Studio E70 Camera
A factory restore completely resets the camera to default settings and restores it to the factory firmware version.
Task
1 Power off the Studio E70 by disconnecting the power source.
2 On the bottom of the camera, insert a straightened paper clip through the factory restore button pinhole.
3 While continuing to hold the restore button, reconnect the power supply to turn the system on.
4 When the system LED indicator light turns amber, stop pressing the restore button.
117

Poly Studio E70 Specifications

General

Field of View	120°
Zoom	5x digital zoom
Frame Rate	30 fps
Management	Poly Lens
Resolution	3840 x 2160 (4K)
Audio Features	Acoustic Fence, NoiseBlockAI
Connectivity	Bluetooth 5.0, Wi-Fi 802.11ac
Microphones	Integrated microphone array
Microphone Range	Up to 25 feet
Speakers	Stereo speakers
Ports	USB-C, Ethernet
Video Standards	H.264, H.265
Compatibility	Microsoft Teams, Zoom