3 Do one of the following:
• Select a network from Available Wi-Fi Networks. (The system lists networks in order of signal strength.)
• Enter the network name in the SSID field.
Selecting a new SSID erases the previous SSID and relevant Wi-Fi settings from the system.
4 Configure the following settings:
Available settings vary with your selections.
Setting Description
Security Specifies the encryption protocol:
• None
• WEP
• WPA/WPA2/FT PSK
• 802.1x EAP
Key (Passphrase/PSK) Specifies an encryption passphrase (like a password) for the Wi-Fi network. You must enter the
passphrase to connect to the Wi-Fi network.
EAP Method Specifies the extensible authentication protocol (EAP) for WPA-Enterprise (802.1xEAP):
• PEAP
• TLS
• PWD
Phase 2 Authentication Specifies Phase 2 authentication method:
• MSCHAPV2
• GTC
User Name Specifies the login user name for WPA-Enterprise (802.1xEAP).
Password Specifies the login password for WPA-Enterprise (802.1xEAP).
IP Address Specifies the IP address of the network.
Your IP Address is Specifies the IP address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Subnet Mask Specifies the network mask address for the network.
Default Gateway Specifies the IP gateway for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
DNS Server Specifies the DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
DNS Alternate Server Specifies the alternate DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Configure Network Quality Settings
You can specify how your system responds to network quality issues by controlling how your network handles packets
during video calls.
Task
40
To Next Page
Loading...
Need help?
General
