Poly Studio X52 Administrator's Guide

2. On the bottom of the Studio E70 camera, insert a straightened paper clip through the factory
restore button pinhole.
3. While holding the factory restore button, connect the Studio E70 camera to a power source.
4. When the Studio E70 LED indicator light turns amber, release the restore button.
The factory restore process completes when the LED indicator glows solid white. Once you factory
restore the camera, you can connect the Studio E70 to a system using the USB cable.
Disable IP Camera Mode by Performing a Factory Reset on a Studio E70
37

Poly Studio X52 Specifications

General

Product Type	Video conferencing device
Video Standards	H.264, H.265
Audio Output	Speakers
Wireless Protocol	Wi-Fi 5 (802.11ac)
Bluetooth	Bluetooth 5.0
Audio Codecs	G.711, G.722, Opus
Compatibility	Microsoft Teams, Zoom
Weight	2.6 kg
Dimensions	76.2 x 762 x 101.6 mm