Poly Voyager 5200 Series User Manual

Charge your headset
Your new headset has enough power to pair and make a few calls directly out
of the box. It takes approximately 90 minutes to fully charge the headset; the
indicator light turns off once charging is complete.
A micro USB cable is supplied to allow you to charge the headset with an AC wall
charger (not included) or through a PC's USB port. The PC must be powered on to
charge via USB 2.0 or higher.
Or you can use the accessory charge case. Press the charge case button to begin
charging.
Charge your headset
3

Poly Voyager 5200 Series Specifications

General

Talk Time	Up to 7 hours
Standby Time	Up to 9 days
Water Resistance	P2i nano-coating for moisture protection
Wearing Style	Over-the-ear
WindSmart Technology	Yes
Voice Alerts	Yes
Battery Type	Rechargeable, non-replaceable lithium-ion polymer
Wireless Range	Up to 98 feet (30 meters)
Microphones	Four microphones
Multipoint Technology	Yes
Compatibility	Bluetooth-enabled devices
Additional Features	Smart sensors
Weight	20 grams
Charging Time	90 minutes for full charge