EasyManua.ls Logo

Poly Voyager Focus 2 UC Series - Fit and Charge; Charge Headset

Poly Voyager Focus 2 UC Series
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fit and charge
Wear on the right or left
To position the microphone on the right or left side, rotate the microphone boom up
and over. Bend the boom so it is approximately 2 finger widths from the corner of
your mouth.
Note: Your headset senses when you change the microphone boom from one side to
the other and syncs the audio specific to each side.
Gently flex the headband wider if the fit is uncomfortable on your ears.
Charge
Note: The micro USB cable and charge stand (sold separately) plug into a computer or
wall charger's USB port.
Charge your headset using the micro USB cable or the charge stand (sold separately). The
headset LEDs flash when charging. It takes approximately 2 hours to fully charge your
headset. The LEDs turn off once charging is complete.
Micro USB cable Charge stand (sold separately)
Headset LEDs What they mean
Off Charging complete
Battery high
Battery medium
Battery low
Battery critical
7

Related product manuals