To answer a new call while on an active call, press
Answer. The current call will be put on hold.
To end an active call, replace the handset, press
or . You can also press End Call.
To end a call on hold, access the Calls screen.
Highlight the call on hold. Press Resume and then
press End Call.
Ending calls
From the Calls screen, press Hold or .
To resume a call on hold, press Resume or again.
Holding calls
From the Calls screen, press Transfer or , and call
the other party. After you talk with the other party,
press Transfer or again. Press Blind to transfer a
call without waiting for the tone.
Transferring calls
To enable call forwarding, press Forward from the Main
Menu or Lines screen. Select the forwarding type to be
enabled, enter a forwarding number and press Enable.
To disable call forwarding, press Forward from the
Main Menu or Lines screen, select the forwarding type
to be disabled and press Disable.
To enable per-call forwarding: as your phone rings,
press Forward, enter the forwarding number and press
Forward.
Forwarding calls
To Next Page
Loading...
