Configure Camera Movement
You can adjust the camera movement only when you set the tracking mode to Frame Group or Frame
Speaker.
Procedure
1. Connect the Studio USB device to your computer, then select the Poly Studio tile in Polycom
Companion.
2. Go to Admin Settings > Camera Tracking > Camera Movement and select one of the following
options:
▪ Auto Pan: The camera pans smoothly between the speakers or groups.
▪ Cut: The video cuts between the talkers or groups.
3. Select Save.
Enable Conversation Mode
You can enable your USB device to track speakers in a conversation.
You can’t enable Presenter Mode and Conversation Mode at the same time.
Procedure
1. Connect the Studio USB device to your computer, then select the Poly Studio tile in Polycom
Companion.
2. Go to Admin Settings > Camera Tracking and configure the following settings:
▪ Set Tracking Mode to Frame Speaker.
▪ Set Maximum Zoom to 4x.
3. Go to Admin Settings > Lab Feature > Conversation Mode and select one of the following
options:
▪ On: Captures two speakers in a discussion who are far apart. The Studio USB device
performs a split screen showing the two speakers together. The maximum zoom-in ratio is
fixed to 4x at the same time.
▪ Off: The Studio USB device tracks the speaker who is currently talking.
Enable Presenter Mode
You can enable your USB device to track an active speaker who’s talking and moving.
You can’t enable Presenter Mode and Conversation Mode at the same time.
Procedure
1. Connect the Studio USB device to your computer, then select the Poly Studio tile in Polycom
Companion.
2. Go to Admin Settings > Camera Tracking and configure the following settings:
▪ Set Tracking Mode to Frame Speaker.
▪ Set Maximum Zoom to 4x.
3. Go to Admin Settings > Lab Feature > Presenter Mode and select one of the following options:
▪ On: Captures the active speaker.
▪ Off: Stops capturing the active speaker.
Managing the Studio USB Device
17
To Next Page
Loading...
Need help?
General
