Polycom SoundPoint 550 - Selecting the Correct Headset for Electronic Hookswitch; Selecting the Ring Type

Customizing Your Phone
4 - 7
Selecting the Correct Headset for Electronic Hookswitch
This feature allows you to answer your phone from your headset if you are
using one.
To select a headset that supports electronic hookswitch:
1. Press .
2. Select Settings > Basic > Preferences > Headset > Analog Headset.
3. Scroll to select your headset, and then press the Select soft key.
4. Press to return to the idle screen.
Selecting the Ring Type
You can select different ring types to distinguish different lines or phones from
each other.
To change the incoming ring type:
1. Press .
2. Select Settings > Basic > Ring Type.
3. If multiple lines are configured on your phone, scroll to the desired line
and select it.
For information on headsets that provide Polycom supported electronic hookswitch
features for placing, answering, and ending calls, refer to Technical Bulletin 37477
SoundPoint IP Family Headset Compatibility List, available from
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
b.html