User Guide SoundPoint IP 330/320
4 - 8
4. Press to select the entry.
5. Press Edit soft key.
6. Press to scroll through the list to find the Access field.
7. Press to select the field.
8. For Access, use or to select Enabled.
When Access is enabled, you are allowing the contact to see your presence.
When Access is disabled, you are disallowing the contact from seeing your
presence.
The default for access is Disabled.
9. Press repeatedly to return to the idle display.
You can also delete a contact or dial a contact from your privacy list.
For more information on contacting buddies, refer to Placing a Call on page 3-2
or the Microsoft Office Communicator and Windows Messenger
documentation.
Restarting Your Phone
Periodically, you may need to restart your phone. The reasons for this include:
• Accepting a new configuration
• Accepting new software
Note
In the case of problems, it may be possible to restore normal operation of your
phone without restarting. Contact your system administrator before attempting to
restart your phone.
Note
The call lists are automatically cleared when you restart the phone.
To Next Page
Loading...
Need help?
General