Polycom SoundPoint IP 450 - Changing Your Voicemail Password

HOSTED PBX END USER TRAINING GUIDE
CHANGING YOUR VOICEMAIL PASSWORD
You can set an access code for your mailbox. This access code
will be requested whenever you access the mailbox to collect
messages. When set the access code must be at least 6 digits
in length.
When you are changing your access code:
Enter at least six digits. If you enter less than four
numbers you will be prompted to enter a longer code.
Do not set an obvious code, for example:
Do not match your extension number.
Do not use a sequence of digits, for example 123456.
Do not use the same repeated digit, for
example 111111.
To change your code: Dial 777
 •Ifyourmailboxalreadyhasanaccess
code set, you will be prompted to enter it.
 •Enteryouraccesscode.YourDefault
Password is 112233.
 •Press3 to change your access code.
 •Enteryournewaccesscodefollowedby#.
 •Re-enteryournewaccesscodefollowedby#.
The access code will now be changed.
 •Thesystemwillpromptyouifthecodesdonotmatchor
  isnotacceptable.Itwillalsoconrmthechangeofaccess
code if successful.
TO RECORD YOUR NAME
1 Login to your mail box.
2 If you have messages in your mailbox, Press *.
If you don’t, press 2.
REMINDER
Don’t
forget to
change
your
password
REMINDER
6