Polycom SoundStation 2W - Page 32

SoundStation2W™ Administrator Guide - 32
2. Choose Location Name using the
Scrolling buttons, and press the
Select button. Enter a location
name using the dial pad. This
name will be displayed when
“Location Name and Number”
submenu of “This Phone” menu is
selected from the main menu.
►If you make an error, press the
<DEL soft key to erase the error.
3. Press the SAVE soft key or the
Select button to save your entry.
You may press the Exit button to
cancel your entry.
Assigning a telephone number:
1. Press the Menu button, choose
Admin Setup and press the Select
button, enter passcode (if required)
and press the ENTER soft key.
Choose Location using the Scroll-
ing buttons, and press the Select
button.
2. Choose This Phone # using the
Scrolling buttons, and press
the Select button. Enter the
SoundStation2W™’s telephone
number.
►If you make an error, press the
<DEL soft key to erase the error.
3. Press the SAVE soft key or the Se-
lect button to save your entry. You
may press the Exit button to cancel
your entry.