Polycom VoiceStation 500 User Manual

VoiceStation™ 500 - 4
For Best Performance
► Place VoiceStation™ 500 in the center of a
table or desk.
►Locate VoiceStation™ 500 in a room with
soft furnishings such as carpets, curtains,
and sound-absorbing walls and ceilings.
► Keep papers and other objects away from
your VoiceStation™ 500.
►Speak at normal volume.
►Speak toward your VoiceStation™ 500.
Installing VoiceStation™ 500
1. Connect one end of the long console cable
to the bottom of the phone.
2. Insert the Power Supply plug into a nearby
electrical outlet.
3. Connect the other end of the long console
cable to the bottom of the Power Supply.
VoiceStation™ 500 will run a brief self-
test, and then you will hear a tone. If you
don’t hear the tone, verify that the outlet is
working and the power is switched on.
4. Connect the short telephone cable to the
Power Supply. Your System Administrator
can help you to identify a standard analog
phone line.

Polycom VoiceStation 500 Specifications

Power

voltage	110V 60Hz AC / 220V 50Hz AC
console loudspeaker volume	86 dBA SPL at 0.5 m
console loudspeaker frequency response	300 to 3300 Hz

Microphone

microphone frequency response	300 to 3500 Hz
microphone pickup range	7 ft.
number of microphones	3 cardioid microphones

Operating Environment

operating temperature	5º to 40º C
relative humidity	20% to 85% (non-condensing)
storage temperature	30º-55º C

Recommended Room Conditions

room size	<25 m² or 5m X 5m
noise level	<48 dBA
reverberation time	<0.4 seconds

Weight and Dimensions

dimensions	24.2 cm x 23.5 cm x 7.6 cm
dimensions (imperial)	9.5 in x 9.25 in x 3.0 in
weight	0.57 kg