Polycom VoiceStation 500 User Manual

VoiceStation™ 500 - 5
5. Connect the other end of the short tele-
phone cable to a jack wired for a standard
analog phone line.
► Do not plug the VoiceStation™ 500 into a
digital telephone network. Doing so may
damage the phone.
6. Place VoiceStation™ 500 in the center of
the room on a at, stable surface and press
the Volume Up and Volume Down buttons
to adjust the Ringer.
► The Ringer has three modes: High, Low,
and Off. The Ringer sounds when you
press the Volume buttons to indicate current
status.
7. Press the On/Off button to obtain a dial
tone.
► If you do not hear a dial tone, you may not
be connected to an analog telephone line.
For assistance, contact your System Admin-
istrator.
►When the On/Off indicator light is on, the Volume
buttons control the sound level of the speaker.
►When the On/Off indicator light is off, the
Volume buttons control the ringer volume.
Using VoiceStation™ 500
The Polycom
®
VoiceStation™ 500
supports three modes of operation:
• POTS Audio
• Bluetooth Audio (headset and hands-
free prole)
• Wired Audio Mode (2.5mm)
The Link Indicator is off when the phone
is in normal POTS mode. The Link
Indicator will be slowly ashing blue when
the VoiceStation™ 500 is in Bluetooth
mode, and it will be solid amber when
the phone is in Wired Audio mode (with a
cable connected).
When in POTS mode, inserting a 2.5mm
cable enables Wired Audio Mode. To
enter Wired Audio Mode, press the Mode
button. The amber link indicator will
come on. It is possible to make/answer
Bluetooth and POTS calls when in Wired
Audio Mode. For more information, refer
to ‘Changing between calls in Wired Audio
Mode’ on Page 15.

Polycom VoiceStation 500 Specifications

Power

voltage	110V 60Hz AC / 220V 50Hz AC
console loudspeaker volume	86 dBA SPL at 0.5 m
console loudspeaker frequency response	300 to 3300 Hz

Microphone

microphone frequency response	300 to 3500 Hz
microphone pickup range	7 ft.
number of microphones	3 cardioid microphones

Operating Environment

operating temperature	5º to 40º C
relative humidity	20% to 85% (non-condensing)
storage temperature	30º-55º C

Recommended Room Conditions

room size	<25 m² or 5m X 5m
noise level	<48 dBA
reverberation time	<0.4 seconds

Weight and Dimensions

dimensions	24.2 cm x 23.5 cm x 7.6 cm
dimensions (imperial)	9.5 in x 9.25 in x 3.0 in
weight	0.57 kg