Polycom
®
VoxBox
™
Bluetooth/USB Speakerphone Quick Tips
3725-49009-001A | December 2017
The Polycom VoxBox Bluetooth/USB
speakerphone enables you to send and receive
audio during calls and to play music when
connected to a computer with a USB cable or
paired with a Bluetooth device.
Polycom VoxBox Features
The following figure and table identify the parts of
the VoxBox speakerphone.
VoxBox Features
Turn On VoxBox
When you turn on VoxBox, the volume indicators
show white until the speakerphone is in use.
To turn on VoxBox:
» Press the Power button.
Turn Off VoxBox
Make sure to turn off VoxBox when it is not in use
to conserve battery.
To turn off VoxBox:
» Press and hold the Power button for two
seconds.
The status indicator light flashes white and a
tone plays as the speakerphone turns off.
Note: VoxBox automatically turns off after 10
minutes of inactivity when not charging.
Disconnect USB cable to end charging mode.
Charge VoxBox
Charging the speakerphone can take three to six
hours, depending on the battery level and
charging method.
To charge:
» Do one of the following:
➢ Connect the Micro USB cable from the
USB port on VoxBox to the USB port on
your computer.
➢ Connect the Micro USB cable from the
speakerphone to a USB plug then plug it
into an outlet.
The Power button flashes white until fully
charged.
Connect Your Computer to VoxBox
Connect VoxBox to your computer using a Micro
USB cable and use VoxBox as your speaker and
microphones.
To connect to VoxBox:
1 Connect the Micro USB cable from the USB
port on VoxBox to the USB port on your
computer.
2 Set VoxBox as your default audio device in
your computer’s system settings or in the
communication client.