Polycom VVX 500 - Page 2

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
© Copyright Schmooze Com, 2012
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.