www.cuisinetechnology.com 16
Canisters not vacuuming properly.
• Accessory hose not properly attached. Make sure vacuum
hose is completely inserted into the lid of the canister and
inserted properly in the Accessory Port on the Vacuum
Sealer.
• Port on canister in incorrect position; port should be in the
“Vacuum” position.
• Insufficient head space in canister. Allow at least 1 inch (2.5
cm) of space between the surface of the items in the canister
and the lid.
• Damaged canister lid or body. Check canister, lid and seal for
damage.
CAUTION: When the unit is used for an extended
period of time without allowing sufficient time
between sealing, it may overheat and shut down.
Allow at least 20 seconds between each seal.
!
TECHNICAL SPECIFICATIONS
Electrical Requirements: Model VSCR-150AC1B - 120 VAC, 60Hz
Model VSCR-150AC2E - 240 VAC, 50Hz
15.4 (L ) x 6.3 (W) x 3.8 (D) inches
(39.0 x 16.0 x 9.75 cm)
4 lbs (1.8 kg)
12.6 inches (32.0 cm)
Overall Dimensions:
Weight:
Maximum Bag/Roll Width:
To Next Page
Loading...
Need help?
General
