17
PolyScience Vacuum Sealing Systems
This equipment is marked with the crossed out wheeled bin
symbol to indicate it must not be disposed of as unsorted
municipal waste.
It is your responsibility to correctly dispose of this equipment
at lifecycle-end by handing it over to an authorized facility for
separate collection and recycling. By doing so, you will help
to conserve natural and environmental resources and you will
ensure that your equipment is recycled in a manner that protects
human health.
For more information, please contact PolyScience.
REPLACEMENT BAGS & ROLLS
A variety of heat-seal bags and rolls are available for your 150
Series Vacuum Sealer:
Corrugated Bags
Size (W x L)
6 x 10 in. / 15.25 x 25.4 cm
8 x 12 in. / 20.3 x 30.5 cm
11 x 16 in. / 28 x 40.6 cm
Count
30
30
18
Part Number
VBC-0610
VBC-0812
VBC-1116
Corrugated Rolls
Size (W x L)
8 in. x 20 ft. / 20.3 cm x 6.1 m
11 in. x 20 ft. / 28 cm x 6.1 m
Count
3 rolls
3 rolls
Part Number
VBR-0820
VBR-1120
All can be ordered online at: www.cuisinetechnology.com
DISPOSAL
To Next Page
Loading...
Need help?
General
