AUTOSALT®/POOLSQUAD®/POOLSQUAD® AMPERO/PRO - PAPI004082 – FR/EN/ES/DE - Rev.03.16
Chlorination STOP
pH Regulation ON
Only POOLSQUAD Pro
The addition of Chemical products such as flocculating agents, anti-
algae or others cleaning products can alter ORP probe reading. You
have to wait sometimes several weeks before these effects
disappeared.
Beforehand, check proper functioning of ORP probe with a manual
calibration.
Chlorination ON
pH Regulation STOP
If you have the empty tin option on your device.
Detection of liquid lack in pH regulation tin.
Ensure that tin of corrective solution doesn’t be empty.
Salt sensor « ??? » or pH
« ???”
Any calibration from sensor
is validated.
Chlorination STOP
pH Regulation STOP
pH « ???” sensor
Any calibration from pH
probe is validated
Chlorination STOP
pH Regulation STOP
If sensor is not calibrated, change it and you have to do a calibration
again.
Calibration successfully pH probe (see §6.2).
To Next Page
Loading...
