POOLEX Silverline MINI - Programming Start;Stop

22
This function is for programming the Start/Stop timing. You can programme up to 3 different Start/Stop timings. Setting
is as follows:
Refer to the following section to activate the programme
Step 1: Select the programme to be congured,
- Press twice to select programme 1.
- Press 3 times to select programme 2.
- Press 4 times to select programme 3.
Step 2: Press to programme the start time.
Step 3: Adjust the hours with the buttons and .
Step 4: Press to switch to minutes.
Step 5: Adjust the minutes with the buttons and .
Step 6: Press to programme the stop time.
Step 7: Adjust the hours with the buttons and .
Step 8: Press to switch to minutes.
Step 9: Adjust the minutes with the buttons and .
Step 10: Press to validate the programme.
Step 11: Press to return to the main screen.
4. Use
4.5 Programming Start/Stop
Step 3 Step 4Step 2Step 1
Step 7
Step 11
Step 8Step 6
Step 10
Step 5
Step 9
x2
x3
NB: The remote control
returns automatically to
the main screen after 10
seconds.