To Next PageTo Next PageWhy does the motor fail to develop full power on my Porter-Cable Saw?
If the motor on your Porter-Cable Saw fails to develop full power, the issue might be low line voltage, so check the power line for proper voltage.
General| Type | Band Saw |
|---|---|
| Weight | 40 lbs |
| Blade Length | 59.5 in |
| Cutting Capacity (Width) | 9 in |
| Blade Size | 6-1/2 inches |
| Bevel Capacity | 45 degrees |
Details motor specifications including amps, voltage, and horsepower.
Specifies blade width and length required for the band saw.
Defines the maximum cutting depth and width of the band saw.
Explains various warning symbols used in the manual for hazard identification.
Defines hazard levels: DANGER, WARNING, and CAUTION for safety awareness.
Core safety precautions and best practices before operating the power tool.
Emphasizes eye, face, and hearing protection for safe operation.
Covers securing work, disconnecting power, and proper tool maintenance.
Ensures saw stability and secure workpieces to prevent accidents.
Covers correct blade installation, guides, and tension for safe operation.
Details precautions for workpiece size, small pieces, and monitoring operation.
Details power requirements, circuit protection, and motor specifications.
Explains the importance and procedure for proper electrical grounding.
Provides recommendations for selecting and using appropriate extension cords.
Lists the tools required for assembling the band saw.
Lists all items included in the product packaging for verification.
Defines specific terminology related to band saw operation and parts.
Defines general woodworking terms relevant to band saw usage.
Step-by-step guide for assembling the main cabinet stand.
Covers mounting the sawdust port, table, and attaching the saw body.
Procedures for safely installing and removing the saw blade.
Instructions for tilting the band saw table to desired angles.
Explains how to use and adjust the included miter gauge.
Details setting the 90° stop and adjusting blade tension.
Guides on how to adjust the blade tracking for optimal performance.
Adjusting the upper blade guides and support bearing for proper blade guidance.
Adjusting the lower blade guides and support bearing for proper blade guidance.
Procedures for aligning the drive pulleys for the belt system.
Covers essential functions like the ON/OFF switch and general usage.
Discusses general cutting, curve cutting, and circle cutting procedures.
Recommends blade widths for various cutting operations.
Instructions for adjusting the band saw's operating speed.
Step-by-step guide for replacing the drive belt.
Instructions for reconfiguring motor wires for 240V power.
Covers cleaning, debris removal, and table care for the band saw.
Maintenance tips for the motor and blade wheel tires.
Adjusting the upper blade guide and information on lubrication.
Solutions for common issues like blade tracking and motor speed.
Addresses issues like motor noise, starting, overheating, and stalling.
Safety advice and recommendations for using accessories.
Comprehensive list of parts for the band saw.
Parts list and visual schematic for the cabinet stand.
Details the three-year limited warranty terms and conditions.
Information on free service and money-back guarantee.
