EasyManua.ls Logo

Porter-Cable PCFP02040 - Risk of Serious Injury or Property Damage When Transporting Compressor; Specifications

Porter-Cable PCFP02040
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 - ENG
HAZARD
RISK OF SERIOUS INJURY OR PROPERTY DAMAGE
WHEN TRANSPORTING COMPRESSOR
WHAT CAN HAPPEN HOW TO PREVENT IT
• Oil can leak or spill and could result
in fire or breathing hazard; serious
injury or death can result. Oil leaks will
damage carpet, paint or other surfaces
in vehicles or trailers.
• Always place compressor on a
protective mat when transporting to
protect against damage to vehicle
from leaks. Remove compressor from
vehicle immediately upon arrival at
your destination.
HOT SURFACES
PUMP CYLNDER
AND HEAD
OUTLET TUBE
CHECK
VALVE
SAFETY VALVE
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
SPECIFICATIONS
Model No. PCFP02040
Voltage/Amps/Hz-Single Phase 120/14A/60
Minimum Branch Circuit Requirement 15 amps
Fuse Type Time Delay
Air Tank Capacity 4 Gallon (15.1 liters)
Pump Oil Capacity 10.6 oz. (313.5 mL)
Approximate Cut-in Pressure 105 psig
Approximate Cut-out Pressure 135 psig
SCFM @ 40 psig 4.9 *
SCFM @ 90 psig 3.4 *
Weight 58.4lbs(26.5kg)
*Tested per ISO 1217
Refer to Glossary for abbreviations.

Related product manuals