10
Design Specifications
Operational
Light Source:
Visible Laser Diode (VLD) @ 650 nm
Laser Power: Less than 1.0 mW average
Depth of Scan Field:
12.7 mm – 254 mm
(0.5" – 10")
0.33 mm (13 mil) Bar Code
Scan Speed: 72 ± 2 scan lines per second
Scan Pattern: Single scan line
Minimum Bar Width: 0.1016 mm (4 mil)
Decode Capability: Reads standard 1D and GS1 DataBar symbologies.
System Interfaces: USB, Keyboard Wedge
Print Contrast: 35% minimum reflectance difference
No. Characters Read:
Up to 80 data characters. The maximum number will
vary based on symbology and density.
Scan Angle: 46° Horizontal
Pitch, Yaw: 68°, 52°
Beeper Operation: 7 tones or no beep
Indicators (LED):
Red = good read
Green = laser on, ready to scan
Mechanical
Length: 110 mm (4.3")
Width: 70 mm (2.8")
Height: 153 mm (6.0")
Weight: 120 g (4.23 oz)
Specifications subject to change without notice.
To Next Page